Asset Integrity Management &
Inspection Services
IRATA-certified rope access, advanced NDT and a full AIMS programme for offshore and onshore assets across Dubai and Abu Dhabi.
Request Technical ProposalWhat Our Accreditations Mean for You
Reports and certifications from accredited bodies carry decisive weight with regulators, insurance underwriters, and classification societies.
The Emirates International Accreditation Centre assesses inspection bodies against international standards. Reports from an accredited body carry weight with regulators and insurers.
Both are classification societies. Their recognition matters on marine and offshore work, where class approval of the service supplier is often a contract requirement.
ASNT-based personnel certification shows who is qualified to perform and interpret each NDT method, and at what qualification level.
AMPP certifies coating and corrosion personnel. It gives you inspectors trained to judge coating condition and corrosion damage, not only record it.
Both certify rope access technicians by level and audit safe working systems. IRATA is the standard requirement on UAE and offshore sites; SPRAT is its North American counterpart.
What Asset Integrity Management Covers
Asset integrity management is how an operator keeps plant and structures safe, reliable and fit for purpose. It joins risk assessment, inspection, maintenance and records into one programme, so the condition of each asset is known and every defect has an owner.
The work starts at design, where materials and corrosion allowances are set, and carries through fabrication, commissioning and operation. In later life, it covers life extension and fitness-for-service assessment, and at the end it covers safe decommissioning. An AIMS (asset integrity management system) is the written framework behind all of it: policy, risk ranking, inspection plans, repair procedures, management of change, competence records and audit.
Extreme Gulf Operating Environments
Heat, humidity, airborne salt and short shutdown windows put extra load on asset integrity frameworks in the UAE. Local execution experience matters for that reason.
Integrated Engineering & Rope Access
Megarme pairs engineering consultancy with rope access execution. The team that plans your inspection scope also supplies the technicians who carry it out, so findings pass from the work face to the integrity engineer without a hand-off between contractors.
Operators in Dubai and Abu Dhabi use this setup for asset integrity services that range from baseline surveys and inspection campaigns to maintenance and repair, and for longer-term solutions built around risk-based inspection.
Asset Types Covered
Specialized inspection and integrity methodology tailored to critical industrial and offshore assets.
Storage Tanks
Floor and shell corrosion, weld defects, settlement, roof and nozzle condition.
Pressure Vessels
Wall loss, corrosion under insulation (CUI), weld cracking, nozzle and support condition.
Offshore Platforms
Splash-zone corrosion, coating breakdown, fatigue cracking at structural joints.
Pipelines & Piping
Internal & external corrosion, erosion at bends, corrosion under insulation (CUI).
Flare Stacks
Heat damage, corrosion, structural cracking, tip and guy wire condition.
Core Asset Integrity Services in Dubai & Abu Dhabi
From baseline surveys to full turnaround support, engineered for maximum asset uptime.
Risk-Based Inspection (RBI) & Monitoring
Risk-based inspection ranks equipment by likelihood and consequence of failure, following API 580 and API 581. Inspection effort focuses where risk is highest, saving shutdown hours.
Condition monitoring fills the gap with thickness readings at fixed points and corrosion rate trends.
NDT & Advanced Inspection Techniques
Conventional methods (MPI, DPT, RT, UT) and advanced techniques (PAUT, TOFD, ECT) performed by certified personnel under written procedures.
Advanced methods record digital data, allowing future inspections to compare historical baselines without scaffolding.
Structural Integrity & Corrosion Management
We assess platform members, stack and tank shells, supports and access structures for wall loss, cracking, and coating breakdown.
Where findings exceed code limits, fitness-for-service assessments under API 579-1 guide repair or re-rating decisions.
Shutdown & Turnaround Maintenance Support
Turnaround windows are fixed and critical. We mobilize teams sized to the work list and report findings daily to eliminate decision bottlenecks.
Rope access operates concurrently with other trades, removing scaffold erection and dismantling overhead.
Asset Integrity Inspection Services & NDT Methods
Each method finds a specific defect mechanism. The right choice depends on the material, expected damage, and access envelope. Our technicians deploy these methods on rope or conventional access.
Ultrasonic Testing
Measures wall thickness and finds internal flaws. Standard method for corrosion surveys on tanks, vessels, and piping.
Phased Array Ultrasonic
Builds a sectional image of a weld or corroded area and records digital data. Used where RT is impractical.
Time of Flight Diffraction
Detects and accurately sizes crack-like flaws in thick welds, commonly on pressure vessels and heavy-wall pipework.
Radiographic Testing
Produces film or digital images of welds and components. Suits volumetric flaws and small-bore pipework.
Magnetic Particle Inspection
Shows surface and near-surface cracks in ferromagnetic steel, including tank welds and offshore structural joints.
Dye Penetrant Testing
Reveals surface-breaking defects on non-porous material, including stainless steel, titanium, and non-ferrous alloys.
Eddy Current Testing
Detects surface and near-surface flaws in conductive materials without couplant, ideal for exchanger tubes and coated welds.
Sector-Specific Integrity Programmes
Tailored programmes addressing the specific failure mechanisms and regulatory regimes of each sector.
Oil & Gas
Operators rely on our services for tank farms, process vessels, process piping, flare systems, and offshore topsides across operational facilities and planned turnaround events.
Marine & Offshore
Platform structures, splash-zone inspections, FPSO hulls, drilling rigs, and class-related survey renewals with ABS and DNV verification.
Industrial & Civil
Chemical processing plants, manufacturing facilities, and asset managers with stacks, towers, tanks, and tall structures that are difficult to reach.
Industry Standards & Compliance
Inspection scopes and engineering assessments are executed strictly to international codes and operator standards.
Aboveground storage tank inspection, repair, alteration, and reconstruction.
In-service inspection, rating, repair, and alteration of pressure vessels.
In-service inspection, repair, and alteration of process piping systems.
Fitness-for-service evaluation of equipment containing known defects.
Risk-based inspection (RBI) methodology and risk-ranking practice.
Boiler & Pressure Vessel codes and B31 piping design and repair codes.
Integrated management systems for quality, environmental, and occupational safety.
Operator-specific integrity requirements applied on top of international standards.
Why Leading Energy & Industrial Operators Trust Megarme
Our crews work in the conditions that wear assets down fastest: summer heat, coastal humidity, salt-laden air, offshore exposure, and tight shutdown windows. Planning around those conditions is routine for us.
Request Technical Proposal-
Zero-Scaffolding Rope Access: Cuts setup time, footprint, and keeps inspection crews off the turnaround critical path.
-
Shorter Shutdown Downtime: Rapid mobilization and concurrent inspection/repair keep production outages minimal.
-
Comprehensive Certifications: IRATA, DNV, DROPS, ABS, LEEA, and ISO 9001/14001/45001 accredited.
-
30+ Years Regional Proven Track Record: Established in the UAE since 1993 with continuous onshore and offshore execution.
-
Approved Vendor Status: Fully registered and pre-qualified with ADNOC, Saudi ARAMCO, and regional majors.
Frequently Asked Questions
Everything you need to know about our asset integrity management services in the UAE.
We work with oil and gas operators, marine and offshore owners, and industrial and civil asset owners. Typical assets are storage tanks, pressure vessels, piping, flare stacks, offshore platforms and tall structures. The common thread is equipment that is hard to reach and costly to take out of service.
You can request an initial survey, audit, or scope discussion directly through our contact page or by emailing our technical team at sales@megarme.com. We will review your equipment specifications and prepare a formal technical proposal.
It starts with a review of design data and past reports, then covers access set-up, surface preparation, visual examination and NDT. Findings are recorded against code limits and ranked by severity. The final report lists measured data, defects found and recommended actions, with remaining-life estimates where the scope calls for them.
The interval depends on the code, corrosion rate and risk ranking. Three API standards set how often fixed equipment must be inspected: API 510 covers pressure vessels, API 570 covers piping, and API 653 covers storage tanks. Each sets a maximum gap between inspections, and each lets you use risk-based inspection (RBI) to set the schedule instead.
As a rough guide, vessels get an internal check every 10 years at most and an external check every 5 years. Piping is checked every 5 to 10 years, depending on its class. Tanks get an external check every 5 years. Their first internal check usually comes at 10 years, and later ones can stretch to 20 or 30 years depending on the tank's release-prevention features.
Yes, when it is run to a recognized system. IRATA's International Code of Practice requires a working line and a separate back-up line, trained and assessed technicians, a supervisor at Level 3 and a rescue plan before work starts. Rope access also keeps people from erecting and dismantling scaffold at height, which removes a hazard of its own.
Ready to Protect Your Critical Assets?
Connect with Megarme's integrity engineers and IRATA-certified specialists to plan your next inspection campaign or shutdown maintenance.
Request Technical Proposal